Heat Pump Installers in Kent
Browse 45 MCS-certified Heat Pumps installers in Kent. All installerslisted below are verified on the MCS register. The Boiler Upgrade Scheme covers up to £7,500 of the installation cost. 38 installers have Google ratings, averaging 4.4/5.
Showing 45 Heat Pumps installers in Kent
A Greener Alternative Ltd
east-sussex, hampshire, kent +1 more
AES Smart Metering Ltd
city-of-london, essex, greater-london +1 more
ARSH Heating Limited
kent
Assembly Renewable Energy Group Ltd
kent
Bushby Heating Plumbing & Gas Services Limited
city-of-london, greater-london, surrey +1 more
Cahill Corporation Ltd T/A as Cahill Electrical and Cahill Renewables
essex, kent
Chris Bartholomew Electrical Contractors Ltd
east-sussex, kent
Clairglow Heating Ltd
kent
Concept Contracts LTD
city-of-london, essex, greater-london +1 more
Convert Energy Ltd
kent
Correct Contract Services Ltd
berkshire, buckinghamshire, east-sussex +6 more
Crystal Windows And Doors Limited
essex, hertfordshire, kent +1 more
E.Reina Limited T/A Reina Group
east-sussex, essex, kent +2 more
Eco Build Partners Ltd T/A Senergy Direct
essex, greater-london, kent
Ecolution Group Ltd
kent
EMW Franchising Ltd t/a EnergyMyWay
berkshire, bristol, buckinghamshire +10 more
Energy Saving Specialist Ltd
kent
EnergyMyWay (Oxford) Ltd t/a EnergyMyWay
berkshire, bristol, buckinghamshire +10 more
Green Heat UK Ltd
east-sussex, kent
Greenman Solar Ltd
berkshire, buckinghamshire, east-sussex +6 more
Hudsons (Electrical Contractors) Ltd
berkshire, buckinghamshire, east-sussex +6 more
HuMa Renewables Ltd
bristol, kent
Invicta Building Services Limited
berkshire, kent, northumberland
Invicta Clean Energy Limited
kent
Marble Electrical Contractors Ltd
dorset, hampshire, kent +2 more
MJL Renewables Limited
east-sussex, kent
NCC South East Ltd
kent
OHM Energy Limited
bedfordshire, berkshire, buckinghamshire +9 more
Optimum Renewables LTD
east-sussex, kent, west-sussex
Proton Energy Solutions Ltd t/a Proton Energy
greater-london
Qwala Limited
lincolnshire
Renewable Expert Ltd TA Creative Low Carbon
kent
RUS Property Services Ltd
city-of-london, essex, greater-london +1 more
Solar Air UK Limited
cornwall, kent
Solar Renewable Installations Ltd
newport, berkshire, buckinghamshire +7 more
SolarAge UK Ltd T/A Solar Age
kent
Sungod Solar Ltd t/a SGS Energy
aberdeenshire, kent
Sussex Solar Ltd
hampshire, kent, surrey
The EcoGlow Group Ltd
kent, surrey
The Fuel Effect
kent, surrey
The Solar & Renewables Co. Ltd t/a The Solar Co.
essex, kent, surrey
Worcester Renewable Energy Ltd
ceredigion, herefordshire, kent +2 more
How do you choose a Heat Pumps installer in Kent?
Check MCS Certification
Only MCS-certified installers qualify you for the Boiler Upgrade Scheme grant of up to £7,500. Verify your installer on the MCS register. 45 installers serving Kent are currently certified.
Get a Heat Loss Survey
A proper installer will survey your home and carry out a heat loss calculation before recommending a system size. This determines the kW capacity needed. Be wary of quotes given without a home visit in Kent.
Compare Brands & SCOP Ratings
Ask which brand and model is being quoted. Look for a SCOP rating of 3.5+ for air-to-water systems. Daikin, Mitsubishi Electric, Samsung, and Grant are the most common brands used by UK installers.
Check Insulation Requirements
Heat pumps need a well-insulated home (EPC C or better). Ask the installer whether your current insulation is adequate or if upgrades are needed first. Separate insulation grants may be available through ECO4 or the Great British Insulation Scheme.
Verify Warranties
Heat pump manufacturers typically offer 5–7 year product warranties. Ask about the installer’s workmanship warranty (minimum 2 years). Some brands like Daikin offer extended warranties up to 10 years when installed by an accredited partner.
Ask About Running Costs
A good installer will estimate your annual running costs compared to your current heating system (oil, gas, or solid fuel). With a SCOP of 3.5, a heat pump uses roughly one-third the energy of a direct electric heater for the same heat output.
Solar Panels in Kent
Solar yield, savings calculator, and local data for Kent.
Solar Incentives in Kent
0% VAT, Smart Export Guarantee, and other incentives for Kent.
Heat Pumps Guides
Other Renewable Energy Professionals in Kent
Solar Panel Installers
MCS-certified solar panel installers in Kent. 0% VAT on residential installs.
Solar Thermal Installers
MCS-certified solar thermal in Kent.
Biomass Installers
MCS-certified biomass in Kent. Grant up to £7,500.
EPC Assessors
MCS-certified epc in Kent.
EV Charger Installers
OZEV-approved ev chargers in Kent. Grant up to £350.
Solar Panels by Town in Kent
Frequently Asked Questions About Heat Pump Installers in Kent
How do I find a good heat pump installer in Kent?
Check that the installer is MCS certified, as this is required to claim the Boiler Upgrade Scheme grant of up to £7,500. A good installer will carry out a full heat loss calculation for your home before recommending a system size. Compare at least 2–3 quotes from installers in Kent, ask for references, and verify they carry public liability insurance. Look for experience with the specific brand they’re quoting.
How much do heat pump installers in Kent charge?
A typical air-to-water heat pump installation in Kent costs £8,000–£14,000 before the Boiler Upgrade Scheme grant. The grant provides up to £7,500, which can bring the net cost down to as low as £500–£6,500. Prices vary based on the heat pump brand (Daikin and Mitsubishi are most common), system capacity, whether you need a new hot water cylinder, and the complexity of the pipework. Ground source systems are more expensive at £12,000–£20,000.
Are heat pump installers in Kent MCS certified?
Not all heat pump installers are MCS certified. You must use an MCS-certified installer to qualify for the Boiler Upgrade Scheme grant of up to £7,500. MCS maintains a public register at mcscertified.com. On this page, 45 of the 45 listed installers are MCS certified. Look for the “MCS Certified” badge on each listing.
How long does heat pump installation take?
A typical air-to-water heat pump installation takes 2–3 days. If the existing radiators need upgrading or underfloor heating is being added, it may take longer. The full process from initial survey to completed installation is usually 6–12 weeks, including the heat loss survey, Boiler Upgrade Scheme application, equipment ordering, and installation scheduling.
Do I need to upgrade my insulation before getting a heat pump?
It is recommended your home has an EPC rating of C or better before installing a heat pump. Heat pumps operate at lower flow temperatures than oil or gas boilers, so good insulation is essential for them to work efficiently. Your installer should carry out a heat loss calculation — if your home loses too much heat, they may recommend loft, cavity wall, or external insulation first. Separate grants may be available through schemes such as ECO4 or the Great British Insulation Scheme.
Get a Free Heat Pump Quote
Connect with MCS-certified heat pump installers in Kent.
Sources
Last updated: August 2026
Fact-checked by John Rooney, Solar Energy Editor. Editorial policy