Solar Panels in Leatherhead, Surrey

A 3-4kWp system in Leatherhead typically costs £5,000-£8,000 with 0% VAT included — the zero-rate VAT alone saves around £1,000 compared to the standard 20% rate. Based on Leatherhead's solar yield of 975 kWh/kWp, a 4kWp system generates approximately 3,900 kWh/year, paying for itself in 6-8 years through electricity savings of £1092+/yr and Smart Export Guarantee income of 4-6p/kWh. Adding a home battery (5-10 kWh) costs an additional £3,000-£6,000 and also benefits from 0% VAT. We recommend getting at least three quotes from MCS-certified installers to compare pricing and equipment.

Yes, solar panels generate electricity all year round, including during winter months. While output is lower from November to February, Surrey still receives usable daylight hours even in December, and panels work from diffused light on cloudy days. With 1,600 sunshine hours per year, the annual generation figure of 3,900 kWh for a 4kWp system in Leatherhead already accounts for this seasonal variation. Cooler winter temperatures actually improve panel efficiency compared to hot summer days. Adding a battery allows you to store daytime generation for evening use when winter daylight hours are shorter.

A typical residential installation takes 1-2 days of on-site work. This includes erecting scaffolding, mounting the panels on roof brackets, wiring, inverter installation, and connecting to your consumer unit. The full process from initial survey to completed installation usually takes 2-6 weeks depending on installer availability and DNO requirements. Your MCS-certified installer handles the DNO notification (G98 for systems under 3.68 kW, G99 for larger systems) and all associated paperwork on your behalf.

Most homes in Leatherhead benefit from a 3-6 kWp system. A 4kWp system (10 panels at ~400W each) generates 3,900 kWh/yr at Leatherhead's yield of 975 kWh/kWp, covering 103% of average household electricity use. The system requires approximately 18-20 m² of unshaded roof space. If you have an electric vehicle or heat pump, a larger 5-6 kWp system (12-15 panels) may be more appropriate to offset the additional demand. Your MCS-certified installer will assess your roof space, orientation, shading, and electricity consumption to recommend the optimal size during a site survey.

In most cases, regular UK rainfall keeps solar panels clean enough to perform well. If your panels are near trees, under bird flight paths, or at a low pitch angle (below 15°), an annual clean may improve output by 2-5%. Never use abrasive materials, pressure washers, or household cleaning products — a soft brush and clean water is sufficient. Professional panel cleaning services typically cost £50-£100 per visit. Your panels have no moving parts and require very little maintenance over their 25-30 year lifespan.

Get at least 3 quotes from MCS-certified installers to compare pricing, equipment brands, and warranty terms. Check each company is registered with MCS at mcscertified.com — this certification is required for Smart Export Guarantee eligibility. Look for 25-year panel performance warranties and 10-15-year inverter warranties as a minimum. Ensure your installer includes the DNO notification (G98/G99 application) and handles all paperwork. Remember that 0% VAT applies automatically to residential installations, so you should not be charged any VAT on the total cost.

A smart meter is required to sell surplus electricity back to the grid under the Smart Export Guarantee (SEG) and earn 4-6p/kWh for your exports. Your energy supplier will install a smart meter for free if you do not already have one — contact them before or shortly after your solar installation. You do not strictly need a smart meter for the solar panels themselves to work, but without one you cannot receive SEG payments. Your MCS-certified installer submits the G98/G99 application to your Distribution Network Operator after installation to register your system for grid export.