Solar Panels in Maltby, South Yorkshire

A 3-4kWp system in Maltby typically costs £5,000-£8,000 with 0% VAT included — the zero-rate VAT alone saves around £1,000 compared to the standard 20% rate. Based on Maltby's solar yield of 895 kWh/kWp, a 4kWp system generates approximately 3,580 kWh/year, paying for itself in 6-8 years through electricity savings of £1002+/yr and Smart Export Guarantee income of 4-6p/kWh. Adding a home battery (5-10 kWh) costs an additional £3,000-£6,000 and also benefits from 0% VAT. We recommend getting at least three quotes from MCS-certified installers to compare pricing and equipment.

Most roofs are suitable for solar panels. You need at least 18-20 m² of unshaded roof space for a typical 4kWp system (10 panels at ~400W each). South-facing roofs at 30-40° produce the best yield, but east and west-facing roofs still achieve 80-85% of optimal output. Your MCS-certified installer will assess your roof's orientation, pitch angle, shading from trees or buildings, and structural suitability during a site survey. Slate, tile, and metal roofs are all suitable, though flat roofs require angled mounting frames which add slightly to the cost.

Solar panels need very little maintenance over their 25-30 year lifespan. UK rainfall keeps them clean in most cases, and there are no moving parts to wear out. Your inverter may need replacing once during the system's lifetime (10-15 year lifespan, costing around £500-£1,000). An annual visual check to ensure no debris, bird nesting, or damage is recommended, along with occasional cleaning if panels are near trees or at a low pitch angle. Some installers offer maintenance packages, but these are generally optional rather than essential.

Solar PV panels generate electricity from sunlight using photovoltaic cells, while solar thermal panels heat water directly using the sun's warmth. For most UK homes, solar PV is the better investment: it is more versatile (powering all electrical appliances), benefits from 0% VAT, and you can sell excess electricity via the Smart Export Guarantee at 4-6p/kWh. Solar thermal only heats water and does not generate electricity or qualify for SEG income. Solar PV panels also last longer (25-30 years versus 15-20 for solar thermal) and have lower maintenance requirements.

Standard grid-tied solar systems shut down automatically during a power cut for safety reasons — this is to protect engineers working on the grid lines. Your panels will resume generating as soon as the grid power is restored. If you need backup power during outages, you can install a hybrid inverter with battery storage that isolates your home from the grid and continues supplying electricity from the battery and panels. This emergency power supply (EPS) feature is available on most modern hybrid inverters and is worth considering if you experience frequent power interruptions.

South-facing roofs at a 30-40° pitch produce the most electricity (100% of potential yield). South-east and south-west roofs produce around 95% of optimal output. East or west-facing roofs still produce 80-85%, and many installers recommend splitting panels across east and west faces to spread generation throughout the day, which can improve self-consumption. North-facing roofs are generally not recommended for solar panels in the UK as they receive significantly less direct sunlight. Your MCS-certified installer will assess your roof orientation during the site survey.

The Smart Export Guarantee (SEG) is a UK government scheme that requires licensed energy suppliers with 150,000+ customers to offer a tariff to small-scale generators for surplus electricity exported to the grid. Typical rates are 4-6p/kWh, with some suppliers offering up to 15p/kWh on time-of-use or agile tariffs that pay more during peak demand. You need a smart meter and an MCS-certified installation to be eligible. Your energy supplier will install a smart meter for free if you do not already have one. The SEG replaced the Feed-in Tariff scheme, which closed to new applicants in 2019.