Solar Panels in Polegate, East Sussex

A 3-4kWp system in Polegate typically costs £5,000-£8,000 with 0% VAT included — the zero-rate VAT alone saves around £1,000 compared to the standard 20% rate. The system generates approximately 4,120 kWh/year, paying for itself in 6-8 years through electricity savings and Smart Export Guarantee income of 4-6p/kWh. Adding a home battery (5-10 kWh) costs an additional £3,000-£6,000 and also benefits from 0% VAT. We recommend getting at least three quotes from MCS-certified installers to compare pricing and equipment.

Yes. Under the UK's Smart Export Guarantee (SEG), licensed suppliers with 150,000+ customers must offer a tariff for surplus electricity you export to the grid. Typical rates are 4-6p/kWh, with some suppliers offering up to 15p/kWh on time-of-use tariffs. You need a smart meter and an MCS-certified installation to be eligible — your supplier will install a smart meter for free if needed. A typical 4kWp system without battery storage exports around 50-70% of its generation, providing a meaningful income stream alongside electricity bill savings.

Most homes in Polegate benefit from a 3-6 kWp system. A 4kWp system (10 panels at ~400W each) covers 108% of average household electricity use and requires approximately 18-20 m² of unshaded roof space. If you have an electric vehicle or heat pump, a larger 5-6 kWp system (12-15 panels) may be more appropriate to offset the additional demand. Your MCS-certified installer will assess your roof space, orientation, shading, and electricity consumption to recommend the optimal size during a site survey.

South-facing roofs at a 30-40° pitch produce the most electricity (100% of potential yield). South-east and south-west roofs produce around 95% of optimal output. East or west-facing roofs still produce 80-85%, and many installers recommend splitting panels across east and west faces to spread generation throughout the day, which can improve self-consumption. North-facing roofs are generally not recommended for solar panels in the UK as they receive significantly less direct sunlight. Your MCS-certified installer will assess your roof orientation during the site survey.

Solar PV panels generate electricity from sunlight using photovoltaic cells, while solar thermal panels heat water directly using the sun's warmth. For most UK homes, solar PV is the better investment: it is more versatile (powering all electrical appliances), benefits from 0% VAT, and you can sell excess electricity via the Smart Export Guarantee at 4-6p/kWh. Solar thermal only heats water and does not generate electricity or qualify for SEG income. Solar PV panels also last longer (25-30 years versus 15-20 for solar thermal) and have lower maintenance requirements.

Most residential solar installations in the UK are classed as permitted development and do not require planning permission, provided panels do not project more than 200mm from the roof surface. Listed buildings, conservation areas, Areas of Outstanding Natural Beauty (AONBs), and World Heritage Sites may have additional requirements from your local planning authority. Ground-mounted systems are also permitted development if they do not exceed 9m² in area. Your MCS-certified installer can advise on any local restrictions that apply to your property.

Shading from trees, chimneys, or nearby buildings can reduce output significantly — even partial shading on one panel can affect the whole string in older systems. Modern systems use power optimisers or microinverters so that shading on one panel does not drag down the performance of other panels, typically recovering 20-25% of otherwise lost generation. Your MCS-certified installer will assess shading patterns throughout the year during the site survey using specialist tools. If shading is unavoidable, optimisers add approximately £50-£80 per panel but are well worth the investment for maintaining overall system performance.